805-849-1667
Insured & Bonded
805-849-1667
Insured & Bonded
Ventura Epoxy Floors has installed garage floor coatings, commercial epoxy systems, and decorative concrete throughout Ventura, CA for over 20 years, serving homeowners and businesses across the Ventura coastline and inland neighborhoods.
Ventura has some of the oldest housing stock in the county, especially in the neighborhoods closer to Midtown and the area around the harbor, where many homes were built decades before modern concrete and moisture-barrier standards existed. Older slabs in these neighborhoods often have inconsistent thickness, hairline cracking from years of settling, and in some cases, prior coatings that were never properly removed. Before we install anything, we test every slab for moisture and inspect for these specific issues, because installing a new coating over an old, failing one is one of the fastest ways to end up redoing the job within a year.
805-849-1667
We’ve built our reputation here on diagnosing the slab correctly before we ever pick up a grinder.
Garage, commercial, industrial, and specialty coating systems for homes and businesses across Ventura County.
A large share of the garage floor work we do in Ventura involves removing a prior coating that was installed without proper prep — usually painted on or applied with an acid etch instead of mechanical grinding. We strip these failing coatings completely, grind the slab to a clean profile, and apply a 100% solids epoxy system built to actually bond and last.
Learn more
From the shops and restaurants along Main Street and the Avenue district to newer commercial space further east, we install commercial-grade epoxy systems built for daily foot traffic and frequent cleaning.
Learn more
For warehouse and light industrial space near the harbor and along the 101 corridor, we install heavy-duty epoxy and polyurea systems rated for forklift traffic and chemical exposure.
Learn more
Homeowners renovating older Midtown and harbor-area properties often choose metallic epoxy to bring a high-end, modern finish into a space that otherwise still carries its original character. We hand-apply every metallic floor, so the finished pattern is always unique.
Learn more
Flake systems work well in Ventura’s older garages, since the added texture helps disguise minor surface imperfections common in slabs that have been through decades of settling.
Learn more
Polyaspartic coatings cure quickly and resist UV degradation, a real consideration for any Ventura garage or patio that gets consistent coastal sun without much tree cover.
Learn more
For patios and driveways in Ventura’s older neighborhoods, we install stamped and stained decorative concrete finishes, often alongside full removal of any prior coating that was applied without proper preparation.
Learn more
For driveways and patios, especially older ones near the harbor, we apply penetrating sealers that protect against the moisture and salt air that gradually break down unsealed concrete this close to the coast.
Learn more
Pool decks and outdoor walkways near Ventura’s coastal homes benefit from a textured anti-slip additive, particularly given how often these surfaces stay damp from ocean air and morning marine layer.
Learn moreWe work with property managers and business owners in Ventura’s harbor-adjacent and 101-corridor industrial zones, installing flooring built for heavy daily use.
Learn more
Ventura’s coastal pool decks deal with regular morning marine layer and humidity, which means slip resistance matters as much as appearance. Our textured coatings are formulated to perform in those conditions.
Learn more
Interior concrete in Ventura’s older homes often needs more thorough prep before coating. We handle that as part of every installation, leaving the finished space clean and durable.
Learn moreFour steps from slab inspection to a finished floor you can rely on.
We inspect your slab, test for moisture, check for any prior coatings that may need to be removed, and walk through which system fits your space.
We grind the concrete to a clean, open profile, including full removal of any old, failing coatings. This is the step that determines whether the new epoxy actually bonds or eventually peels.
We repair cracking from settling or age before applying the base coat, color layer, and topcoat, typically completing the work in one to two days.
Once cured, we walk the finished floor with you, cover care and cleaning, and review your written warranty.
Garage installations in Ventura generally run $2,800 to $6,500 for a two-car space. Older properties with an existing coating that needs to be stripped first sometimes carry a higher cost due to the extra removal work. Premium polyaspartic or metallic systems start around $6,500. Commercial pricing is based on square footage and traffic demands, and repair work is quoted after we’ve seen the existing damage in person. We always inspect the slab before quoting, since what’s already on the floor matters as much as what we’re putting down.
A properly installed epoxy floor typically lasts 10 to 20 years in Ventura. Because so much of the city’s housing stock is older, the bigger factor in longevity here is often what’s already on the slab — we frequently remove failing prior coatings before installing a new one, and that prep work matters more than almost anything else for how long the new floor lasts.
Yes, and in Ventura this comes up often. Many older garages have a coating that was applied without proper grinding, sometimes just painted directly onto the slab or applied after an acid etch instead of mechanical preparation. We fully remove these before installing anything new, since coating over a failing surface just guarantees a second failure.
Hot tire lift happens when a hot tire creates suction on a coating not built to handle it, causing bubbling or peeling. Our 100% solids epoxy systems are specifically chosen to resist this, which matters in Ventura’s warmer inland neighborhoods especially.
Yes, every estimate is free with no obligation. We’ll inspect your slab, check for any existing coatings, and provide a clear written quote before any work begins.
Cost depends on the size of the space, the condition of the slab, and whether an existing coating needs to be removed first. Older Ventura homes sometimes require additional prep work, which can affect the final price. We provide a detailed, itemized quote during your free on-site estimate.
Yes, in addition to Ventura we regularly serve Ojai, Santa Paula, Oxnard, and Camarillo. If you’re unsure whether your property is in our service area, give us a call and we’ll let you know.
In most cases, yes. We repair hairline cracking and minor settling damage as part of every installation. More significant structural movement may need additional assessment, which we’ll walk you through during your free consultation.
We work throughout Ventura, including Midtown, the harbor-adjacent neighborhoods, and the areas closer to the Avenue and Main Street districts. We also serve the surrounding communities of Ojai, Santa Paula, Oxnard, and Camarillo. Whether your home sits in one of Ventura’s older established neighborhoods or further east in a newer development, we adjust our slab evaluation to match the age and condition of that specific property.
Now serving Ventura County: Ventura, Oxnard, Camarillo, Ojai, Santa Paula, and Port Hueneme.
Reviews from homeowners and businesses across Ventura County
5-star rated on Google — Ventura County epoxy flooring (link to be added)
“Our garage floor looks brand new. The crew was professional, showed up on time, and the flake finish is exactly what we wanted for our Midtown Ventura home.”
“We needed a durable floor for our shop near Pacific View Mall. They explained the prep process clearly and the finished coating has held up great under daily equipment traffic.”
“Honest pricing, showed up when they said they would, and the prep work was clearly the difference. You can tell they actually diamond-grind instead of taking shortcuts.”
Contact Ventura Epoxy Floors for a free on-site estimate across Ventura and Ventura County.
805-849-1667